1. [root@xam ~]# smartctl -a /dev/sda
2. smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.11.1-gentoo] (local build)
3. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
4.  
5. === START OF INFORMATION SECTION ===
6. Device Model:     INTEL SSDSC2BW120A4
7. Serial Number:    CVDA338606431207GN
8. LU WWN Device Id: 5 5cd2e4 04b81e999
9. Firmware Version: DC22
10. User Capacity:    120,034,123,776 bytes [120 GB]
11. Sector Size:      512 bytes logical/physical
12. Rotation Rate:    Solid State Device
13. Device is:        Not in smartctl database [for details use: -P showall]
14. ATA Version is:   ACS-2 (minor revision not indicated)
15. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
16. Local Time is:    Wed Nov 13 17:01:59 2013 MSK
17. SMART support is: Available - device has SMART capability.
18. SMART support is: Enabled
19.  
20. === START OF READ SMART DATA SECTION ===
21. SMART overall-health self-assessment test result: PASSED
22.  
23. General SMART Values:
24. Offline data collection status:  (0x05) Offline data collection activity
25.                                         was aborted by an interrupting command from host.
26.                                         Auto Offline Data Collection: Disabled.
27. Self-test execution status:      (  33) The self-test routine was interrupted
28.                                         by the host with a hard or soft reset.
29. Total time to complete Offline
30. data collection:                ( 2930) seconds.
31. Offline data collection
32. capabilities:                    (0x7f) SMART execute Offline immediate.
33.                                         Auto Offline data collection on/off support.
34.                                         Abort Offline collection upon new
35.                                         command.
36.                                         Offline surface scan supported.
37.                                         Self-test supported.
38.                                         Conveyance Self-test supported.
39.                                         Selective Self-test supported.
40. SMART capabilities:            (0x0003) Saves SMART data before entering
41.                                         power-saving mode.
42.                                         Supports SMART auto save timer.
43. Error logging capability:        (0x01) Error logging supported.
44.                                         General Purpose Logging supported.
45. Short self-test routine
46. recommended polling time:        (   1) minutes.
47. Extended self-test routine
48. recommended polling time:        (  48) minutes.
49. Conveyance self-test routine
50. recommended polling time:        (   2) minutes.
51. SCT capabilities:              (0x0025) SCT Status supported.
52.                                         SCT Data Table supported.
53.  
54. SMART Attributes Data Structure revision number: 10
55. Vendor Specific SMART Attributes with Thresholds:
56. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
57.   5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
58.   9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       1 (70 86 0)
59.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       6
60. 170 Unknown_Attribute       0x0033   100   100   010    Pre-fail  Always       -       0
61. 171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
62. 172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
63. 174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1
64. 183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       9
65. 184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0
66. 187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
67. 190 Airflow_Temperature_Cel 0x0032   029   035   000    Old_age   Always       -       29 (Min/Max 27/35)
68. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1
69. 199 UDMA_CRC_Error_Count    0x0032   100   100   000    Old_age   Always       -       0
70. 225 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       1734
71. 226 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       65535
72. 227 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       44
73. 228 Power-off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       65535
74. 232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
75. 233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       0
76. 241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       1734
77. 242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       85
78. 249 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       46
79.  
80. SMART Error Log not supported
81.  
82. SMART Self-test log structure revision number 1
83. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
84. # 1  Offline             Interrupted (host reset)      10%         1         -
85. # 2  Offline             Interrupted (host reset)      10%         1         -
86. # 3  Offline             Interrupted (host reset)      10%         1         -
87. # 4  Offline             Interrupted (host reset)      10%         1         -
88. # 5  Offline             Interrupted (host reset)      10%         1         -
89. # 6  Offline             Interrupted (host reset)      10%         0         -
90. # 7  Offline             Interrupted (host reset)      10%         0         -
91.  
92. SMART Selective self-test log data structure revision number 0
93. Note: revision number not 1 implies that no selective self-test has ever been run
94.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
95.     1        0        0  Not_testing
96.     2        0        0  Not_testing
97.     3        0        0  Not_testing
98.     4        0        0  Not_testing
99.     5        0        0  Not_testing
100. Selective self-test flags (0x0):
101.   After scanning selected spans, do NOT read-scan remainder of disk.
102. If Selective self-test is pending on power-up, resume after 0 minute delay.
103.