1. === START OF INFORMATION SECTION ===
2. Model Family:     Seagate SV35
3. Device Model:     ST2000VX000-9YW164
4. Serial Number:    Z1E0BCYK
5. LU WWN Device Id: 5 000c50 03fc7eb48
6. Firmware Version: CV12
7. User Capacity:    2,000,398,934,016 bytes [2.00 TB]
8. Sector Sizes:     512 bytes logical, 4096 bytes physical
9. Device is:        In smartctl database [for details use: -P show]
10. ATA Version is:   8
11. ATA Standard is:  ATA-8-ACS revision 4
12. Local Time is:    Tue Oct 29 00:18:41 2013 MSK
13. SMART support is: Available - device has SMART capability.
14. SMART support is: Enabled
15.  
16. === START OF READ SMART DATA SECTION ===
17. SMART overall-health self-assessment test result: PASSED
18. See vendor-specific Attribute list for marginal Attributes.
19.  
20. General SMART Values:
21. Offline data collection status:  (0x82) Offline data collection activity
22.                                         was completed without error.
23.                                         Auto Offline Data Collection: Enabled.
24. Self-test execution status:      (   0) The previous self-test routine completed
25.                                         without error or no self-test has ever
26.                                         been run.
27. Total time to complete Offline
28. data collection:                (  575) seconds.
29. Offline data collection
30. capabilities:                    (0x7b) SMART execute Offline immediate.
31.                                         Auto Offline data collection on/off support.
32.                                         Suspend Offline collection upon new
33.                                         command.
34.                                         Offline surface scan supported.
35.                                         Self-test supported.
36.                                         Conveyance Self-test supported.
37.                                         Selective Self-test supported.
38. SMART capabilities:            (0x0003) Saves SMART data before entering
39.                                         power-saving mode.
40.                                         Supports SMART auto save timer.
41. Error logging capability:        (0x01) Error logging supported.
42.                                         General Purpose Logging supported.
43. Short self-test routine
44. recommended polling time:        (   1) minutes.
45. Extended self-test routine
46. recommended polling time:        ( 220) minutes.
47. Conveyance self-test routine
48. recommended polling time:        (   2) minutes.
49. SCT capabilities:              (0x10b9) SCT Status supported.
50.                                         SCT Error Recovery Control supported.
51.                                         SCT Feature Control supported.
52.                                         SCT Data Table supported.
53.  
54. SMART Attributes Data Structure revision number: 10
55. Vendor Specific SMART Attributes with Thresholds:
56. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
57.   1 Raw_Read_Error_Rate     0x000f   117   099   006    Pre-fail  Always       -       154727872
58.   3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
59.   4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       65
60.   5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
61.   7 Seek_Error_Rate         0x000f   064   060   030    Pre-fail  Always       -       2651280
62.   9 Power_On_Hours          0x0032   029   029   000    Old_age   Always       -       62282
63.  10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
64.  12 Power_Cycle_Count       0x0032   100   100   020    Old_age   Always       -       63
65. 184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
66. 187 Reported_Uncorrect      0x0032   079   079   000    Old_age   Always       -       21
67. 188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
68. 189 High_Fly_Writes         0x003a   088   088   000    Old_age   Always       -       12
69. 190 Airflow_Temperature_Cel 0x0022   053   043   045    Old_age   Always   In_the_past 47 (0 133 47 37 0)
70. 191 G-Sense_Error_Rate      0x0032   100   100   000    Old_age   Always       -       0
71. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       57
72. 193 Load_Cycle_Count        0x0032   070   070   000    Old_age   Always       -       61206
73. 194 Temperature_Celsius     0x0022   047   057   000    Old_age   Always       -       47 (0 24 0 0 0)
74. 197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       24
75. 198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       24
76. 199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
77.  
78. SMART Error Log Version: 1
79. ATA Error Count: 17 (device log contains only the most recent five errors)
80.         CR = Command Register [HEX]
81.         FR = Features Register [HEX]
82.         SC = Sector Count Register [HEX]
83.         SN = Sector Number Register [HEX]
84.         CL = Cylinder Low Register [HEX]
85.         CH = Cylinder High Register [HEX]
86.         DH = Device/Head Register [HEX]
87.         DC = Device Command Register [HEX]
88.         ER = Error register [HEX]
89.         ST = Status register [HEX]
90. Powered_Up_Time is measured from power on, and printed as
91. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
92. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
93.  
94. Error 17 occurred at disk power-on lifetime: 60918 hours (2538 days + 6 hours)
95.   When the command that caused the error occurred, the device was active or idle.
96.  
97.   After command completion occurred, registers were:
98.   ER ST SC SN CL CH DH
99.   -- -- -- -- -- -- --
100.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
101.  
102.   Commands leading to the command that caused the error were:
103.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
104.   -- -- -- -- -- -- -- --  ----------------  --------------------
105.   60 00 08 ff ff ff 4f 00  10d+10:25:48.974  READ FPDMA QUEUED
106.   ef 10 02 00 00 00 a0 00  10d+10:25:48.973  SET FEATURES [Reserved for Serial ATA]
107.   27 00 00 00 00 00 e0 00  10d+10:25:48.973  READ NATIVE MAX ADDRESS EXT
108.   ec 00 00 00 00 00 a0 00  10d+10:25:48.973  IDENTIFY DEVICE
109.   ef 03 46 00 00 00 a0 00  10d+10:25:48.973  SET FEATURES [Set transfer mode]
110.  
111. Error 16 occurred at disk power-on lifetime: 60918 hours (2538 days + 6 hours)
112.   When the command that caused the error occurred, the device was active or idle.
113.  
114.   After command completion occurred, registers were:
115.   ER ST SC SN CL CH DH
116.   -- -- -- -- -- -- --
117.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
118.  
119.   Commands leading to the command that caused the error were:
120.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
121.   -- -- -- -- -- -- -- --  ----------------  --------------------
122.   60 00 08 ff ff ff 4f 00  10d+10:25:46.195  READ FPDMA QUEUED
123.   60 00 08 ff ff ff 4f 00  10d+10:25:46.186  READ FPDMA QUEUED
124.   60 00 08 ff ff ff 4f 00  10d+10:25:46.173  READ FPDMA QUEUED
125.   ef 10 02 00 00 00 a0 00  10d+10:25:46.173  SET FEATURES [Reserved for Serial ATA]
126.   27 00 00 00 00 00 e0 00  10d+10:25:46.173  READ NATIVE MAX ADDRESS EXT
127.  
128. Error 15 occurred at disk power-on lifetime: 60918 hours (2538 days + 6 hours)
129.   When the command that caused the error occurred, the device was active or idle.
130.  
131.   After command completion occurred, registers were:
132.   ER ST SC SN CL CH DH
133.   -- -- -- -- -- -- --
134.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
135.  
136.   Commands leading to the command that caused the error were:
137.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
138.   -- -- -- -- -- -- -- --  ----------------  --------------------
139.   60 00 08 ff ff ff 4f 00  10d+10:25:42.406  READ FPDMA QUEUED
140.   60 00 00 ff ff ff 4f 00  10d+10:25:42.406  READ FPDMA QUEUED
141.   ef 10 02 00 00 00 a0 00  10d+10:25:42.405  SET FEATURES [Reserved for Serial ATA]
142.   27 00 00 00 00 00 e0 00  10d+10:25:42.405  READ NATIVE MAX ADDRESS EXT
143.   ec 00 00 00 00 00 a0 00  10d+10:25:42.405  IDENTIFY DEVICE
144.  
145. Error 14 occurred at disk power-on lifetime: 60918 hours (2538 days + 6 hours)
146.   When the command that caused the error occurred, the device was active or idle.
147.  
148.   After command completion occurred, registers were:
149.   ER ST SC SN CL CH DH
150.   -- -- -- -- -- -- --
151.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
152.  
153.   Commands leading to the command that caused the error were:
154.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
155.   -- -- -- -- -- -- -- --  ----------------  --------------------
156.   60 00 40 ff ff ff 4f 00  10d+10:25:39.612  READ FPDMA QUEUED
157.   60 00 20 ff ff ff 4f 00  10d+10:25:39.581  READ FPDMA QUEUED
158.   60 00 40 ff ff ff 4f 00  10d+10:25:39.579  READ FPDMA QUEUED
159.   60 00 20 ff ff ff 4f 00  10d+10:25:39.572  READ FPDMA QUEUED
160.   60 00 08 ff ff ff 4f 00  10d+10:25:39.563  READ FPDMA QUEUED
161.  
162. Error 13 occurred at disk power-on lifetime: 60126 hours (2505 days + 6 hours)
163.   When the command that caused the error occurred, the device was active or idle.
164.  
165.   After command completion occurred, registers were:
166.   ER ST SC SN CL CH DH
167.   -- -- -- -- -- -- --
168.   40 51 00 ff ff ff 0f  Error: UNC at LBA = 0x0fffffff = 268435455
169.  
170.   Commands leading to the command that caused the error were:
171.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
172.   -- -- -- -- -- -- -- --  ----------------  --------------------
173.   60 00 08 ff ff ff 4f 00  27d+04:49:43.750  READ FPDMA QUEUED
174.   60 00 08 ff ff ff 4f 00  27d+04:49:43.750  READ FPDMA QUEUED
175.   60 00 08 ff ff ff 4f 00  27d+04:49:43.750  READ FPDMA QUEUED
176.   60 00 08 ff ff ff 4f 00  27d+04:49:43.749  READ FPDMA QUEUED
177.   60 00 08 ff ff ff 4f 00  27d+04:49:43.487  READ FPDMA QUEUED
178.  
179. SMART Self-test log structure revision number 1
180. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
181.  
182.  
183. SMART Selective self-test log data structure revision number 1
184.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
185.     1        0        0  Not_testing
186.     2        0        0  Not_testing
187.     3        0        0  Not_testing
188.     4        0        0  Not_testing
189.     5        0        0  Not_testing
190. Selective self-test flags (0x0):
191.   After scanning selected spans, do NOT read-scan remainder of disk.
192. If Selective self-test is pending on power-up, resume after 0 minute delay.
193.