From Whipped Lemur, 3 Years ago, written in Plain Text.
Embed
  1. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.12.0-031200rc6-generic] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Western Digital Red (AF)
  6. Device Model:     WDC WD20EFRX-68EUZN0
  7. Serial Number:    WD-WCC4M0154716
  8. LU WWN Device Id: 5 0014ee 2092a3cf5
  9. Firmware Version: 80.00A80
  10. User Capacity:    2,000,398,934,016 bytes [2.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    5400 rpm
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ACS-2 (minor revision not indicated)
  15. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  16. Local Time is:    Sat Feb  1 12:41:07 2014 MSK
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: PASSED
  22.  
  23. General SMART Values:
  24. Offline data collection status:  (0x00) Offline data collection activity
  25.                                         was never started.
  26.                                         Auto Offline Data Collection: Disabled.
  27. Self-test execution status:      (   0) The previous self-test routine completed
  28.                                         without error or no self-test has ever
  29.                                         been run.
  30. Total time to complete Offline
  31. data collection:                (25920) seconds.
  32. Offline data collection
  33. capabilities:                    (0x7b) SMART execute Offline immediate.
  34.                                         Auto Offline data collection on/off support.
  35.                                         Suspend Offline collection upon new
  36.                                         command.
  37.                                         Offline surface scan supported.
  38.                                         Self-test supported.
  39.                                         Conveyance Self-test supported.
  40.                                         Selective Self-test supported.
  41. SMART capabilities:            (0x0003) Saves SMART data before entering
  42.                                         power-saving mode.
  43.                                         Supports SMART auto save timer.
  44. Error logging capability:        (0x01) Error logging supported.
  45.                                         General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time:        (   2) minutes.
  48. Extended self-test routine
  49. recommended polling time:        ( 262) minutes.
  50. Conveyance self-test routine
  51. recommended polling time:        (   5) minutes.
  52. SCT capabilities:              (0x703d) SCT Status supported.
  53.                                         SCT Error Recovery Control supported.
  54.                                         SCT Feature Control supported.
  55.                                         SCT Data Table supported.
  56.  
  57. SMART Attributes Data Structure revision number: 16
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  60.   1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  61.   3 Spin_Up_Time            0x0027   176   176   021    Pre-fail  Always       -       4158
  62.   4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       22
  63.   5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  64.   7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  65.   9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2176
  66.  10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
  67.  11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
  68.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       14
  69. 192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       12
  70. 193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       9
  71. 194 Temperature_Celsius     0x0022   114   111   000    Old_age   Always       -       33
  72. 196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
  73. 197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
  74. 198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
  75. 199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
  76. 200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
  77.  
  78. SMART Error Log Version: 1
  79. No Errors Logged
  80.  
  81. SMART Self-test log structure revision number 1
  82. No self-tests have been logged.  [To run self-tests, use: smartctl -t]
  83.  
  84.  
  85. SMART Selective self-test log data structure revision number 1
  86.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  87.     1        0        0  Not_testing
  88.     2        0        0  Not_testing
  89.     3        0        0  Not_testing
  90.     4        0        0  Not_testing
  91.     5        0        0  Not_testing
  92. Selective self-test flags (0x0):
  93.   After scanning selected spans, do NOT read-scan remainder of disk.
  94. If Selective self-test is pending on power-up, resume after 0 minute delay.
  95.